Magnetic Level Indicators
Ex Proof Standard Transmitter
The transmitter must be connected with a certified energy limiting device (e.g. Zener barrier) installed in a safe area. This device guarantees the electrical limit values specified below, including the cable. The metal housing of the transmitter must be connected to protection ground.
| Loop supply voltage | 14 to 30VDC |
| Signal output | 4 to 20mA |
| Media temperature | -50 to +150°C |
| Ambient temperature | -20 to +50°C |
| Enclosure | IP68 |
| Housing | stainless steel 316 / 316L |
| Cable gland | PA, blue |
| Seal | Perbunan (NBR) |
| Cable | PVC, blue |
| Output load | max. 100 Ω at 14 VDC |
| max. 900 Ω at 30 VDC |
| Protection type | II 2 GD T135°C Ex ia IIC T4 |
| Approval | ZELM 03 ATEX 0168 |
| Loop supply voltage | 14 to 30VDC |
| Signal output | 4 to 20mA |
| Media temperature | -50 to +150°C |
| Ambient temperature | -20 to +50°C |
| Enclosure | IP68 |
| Housing | stainless steel 316 / 316L |
| Cable gland | PA, blue |
| Seal | Perbunan (NBR) |
| Cable | PVC, blue |
| Output load | max. 100 Ω at 14 VDC |
| max. 900 Ω at 30 VDC |
| Protection type | II 2 GD T85°C, Ex d IIC T6 |
| Approval | ZELM 03 ATEX 0191X |
