Magnetic Level Indicators
Standard Transmitter
The transmitter is fitted on the stand pipe opposite the indicator rail.
The float magnet activates the reed contacts in the transmitter if the level changes, whereby the resistance changes. The resulting change in voltage is converted into a standardised 4...20 mA signal by an internal converter. If the measurement range is exceeded upwards (30 mm), this will be indicated by a jump in the output signal of 115%.
| Approvals Standard Transmitter | |
| Declaration of conformity | >> English/German/French (90.46KB) |
| Gost-R | >> Russian (617.45KB) |
| Föderales staatl. Amt für Gesundheitswesen der Stadt Moskau | >> German/Russian (207.00KB) |
Type 31967
Transmitter 2-Wire Standard
>> Data sheet, English (148.50KB)
>> Data sheet, German (124.62KB)
| Loop supply voltage | 14 to 40VDC |
| Signal output | 4 to 20mA |
| Media temperature | -50 to +150°C |
| Ambient temperature | -20 to +50°C |
| Enclosure | IP68 |
| Housing | stainless steel 316 / 316L |
| Cable gland | PA with bend protection |
| Seal | Perbunan (NBR) |
| Cable | PVC, standard 5 m |
| Output load | max. 100 Ω at 14 VDC |
| max. 1.4 KΩ at 40 VDC |
Type 31967-W
Transmitter 2-Wire high Temperature
>> Data sheet, English (148.05KB)
>> Data sheet, German (148.76KB)
| Loop supply voltage | 14 to 40VDC |
| Signal output | 4 to 20mA |
| Media temperature | -50 to +250°C |
| Ambient temperature | -20 to +50°C |
| Enclosure | IP68 |
| Housing | stainless steel 316 / 316L |
| Cable gland | PA with bend protection |
| Seal | Perbunan (NBR) |
| Cable | Silicone, Standard 5 m |
| Output load | max. 100 Ω at 14 VDC |
| max. 1.4 KΩ at 40 VDC |
